NORA PRO supplies Braglia (Italy) high pressure spray guns to trade buyers across Australia. The gun listed here is rated to 600 PSI and built with an INOX stainless lance, a nylon body, NBR seals and a ceramic 1.5 nozzle, for pest control work and for car, truck and fleet washdown.
What NORA PRO lists from Braglia
One gun, the High Pressure Spray Gun, SKU 18 35.901.16.
- Lance: INOX stainless steel
- Body: nylon
- Seals: NBR
- Maximum pressure: 600 PSI, roughly 41 bar
- Nozzle: ceramic spray, size 1.5
- Weight: 660g
- Length: 300mm
The ceramic nozzle is the part that earns its keep. Ceramic holds its orifice and its spray pattern far longer than brass when you are pushing wettable powders, suspension concentrates or hard water through it, and a worn nozzle quietly changes your application rate before anyone notices. At 660g and 300mm the gun stays light enough to hold through a full termite perimeter or a long chassis washdown.
Where a 600 PSI gun fits
600 PSI, roughly 41 bar, is the maximum rating rather than the working pressure, so your pump decides what the gun actually sees. That rating is high for a hand-held gun and modest next to a 150 bar or 200 bar hot water pressure washer. The gap between those two is where this gun works: 12V and petrol diaphragm pump rigs, tank and trailer setups, and low pressure washdown lines. It is not a replacement for the gun on a pressure washer. Check your pump against the 600 PSI ceiling first, and send us the pump model if you are unsure.
NBR seals, and when to choose something else
NBR (nitrile) is at home with water, mild detergents and petroleum oils and greases, which covers most vehicle and plant washdown and most water-based pest formulations. It is the wrong material for concentrated acids, bleach, ketones such as acetone and MEK, and strong oxidisers.
If your chemical is aggressive, move to a gun sealed for it. VITON (FKM) handles acids and petroleum solvents. EPDM handles bleach, caustics, alkalis and ketones, but not petroleum solvents. We stock guns in both, in the spray guns and lances range. Confirm concentration and temperature against the SDS, and use the Chemical Compatibility Guide as the starting point.
The wider high pressure range
Braglia sits alongside other supplied lines. For heated washdown, CT Italy hot water wash guns cover the hotter end of vehicle and food plant cleaning. For vehicle and fleet work generally, see car, truck and fleet wash. Pest operators will find the matched sprayers, foamers and lances under pest and termite control, and the full seal-matched catalogue sits in chemical-resistant sprayers.
Request a Quote for the Braglia gun, or for a Braglia component that is not listed. Resellers, pest supply houses and workshop distributors, apply for a trade account for wholesale supply and custom labelling.
Braglia FAQs
What does NORA PRO supply from Braglia?
One product at present, the High Pressure Spray Gun, SKU 18 35.901.16. It has an INOX lance, a nylon body, NBR seals, a ceramic 1.5 nozzle and a maximum pressure of 600 PSI. Braglia builds a wider range of high pressure spraying components, so ask if you need something that is not listed.
What is the maximum pressure of the Braglia spray gun?
600 PSI, or roughly 41 bar. That is the ceiling rather than the working pressure, so match it to your pump. It is not rated for the working pressure of a 150 bar or 200 bar hot water pressure washer.
Are the NBR seals chemical resistant?
NBR suits water, mild detergents, petroleum oils and greases. For concentrated acids or petroleum solvents choose VITON, and for bleach, caustics, alkalis and ketones choose EPDM. Confirm concentration and temperature against the SDS.
Is the Braglia gun suitable for pest control?
Yes. It is used in pest and termite work as well as industrial washdown. At 660g and 300mm it stays light for extended handheld use, and the ceramic nozzle holds its spray pattern better than brass with wettable powders and suspension concentrates.
Can I buy Braglia wholesale?
Yes, through a trade account.