GLORIA - Germany
Termifoam | 3.0L Pump Up Termiticide Foam Injector
Item no. 02 000078.00FI
The Gloria Termifoam 3.0L is a compact pump up foam injector with NBR seals, built on the Gloria PRIMA3: a foaming segment turns the termiticide mix into foam, delivered through a foaming injector. It holds 3.0L, works at up to 3 bar (44 PSI), and needs no air line or power lead.
NBR seals.
Key specifications
- Liquid capacity 3.0L
- Max pressure 44 PSI / 3 bar
- Seals NBR
- Bottle or tank HDPE
- Safety release valve Yes
Key benefits
- Turns a termiticide mix into clinging foam
- Compact 3.0L, light to carry
- Hand pumped, no air line or power lead
- NBR seals
- Safety relief valve vents excess pressure
Application fields
What it is for
Pest and termite control work where the treatment goes on as foam, in a lighter unit than the 5.0L. Foam clings and stays in contact longer than a liquid spray.
Termiticides differ, and this unit has NBR seals. Send us the termiticide's SDS and we will confirm before you fill, and always follow the product label. To work out the litres of mix and foam for a job from your label, use our Termite Barrier Calculator.
How to use it
Release any pressure, unscrew the pump and fill to no more than the 3.0L mark, leaving air space to hold the charge. Refit the pump and pump until you feel firm resistance. The safety relief valve vents any excess pressure.
After the job, release the pressure, decant leftover mix back into its container, rinse the tank with clean water and pump some through the injector so the line comes clean. Store it depressurised, out of heat and direct sun.
Keep it running
The pump rod guides are stocked as a genuine Gloria part; for the seal set or injector, tell us the model and we will source it. Pest controllers and resellers can request a quote or apply for a trade account. Genuine Gloria, supplied by NORA PRO. See the larger Gloria Termifoam 5.0L and all pest and termite control equipment.
Technical details
- Brand
- GLORIA
- Item number
- 02 000078.00FI
- Seal Type
- NBR
- Bottle/Tank Material
- HDPE
- Liquid Capacity
- 3.0L
- Max Pressure
- 44 PSI / 3 bar
- Safety Release Valve
- YES
- Injector
- Foaming injector
Common questions
Which termiticides can I use in it?
Send us the product's SDS. It has NBR seals, so we confirm each product before you fill.
3.0L or 5.0L?
The 3.0L is lighter with NBR seals. The 5.0L holds more and has VITON seals.
