KLAGER - Germany
Foamya Clean 1.2L Pump-Up Foam Sprayer
Item no. 03 041212
The Klager Foamya Clean 1.2L is a hand pumped foam sprayer with EPDM seals that turns general cleaning chemistry into thick, clinging foam, so the chemical holds on vertical surfaces and keeps working instead of running to the floor. You pump it by hand, so there is no air line and no power lead. Foamya Clean sits in Klager's Foam Line and replaces the retired Washfoam 1.2 pump up foam sprayer.
EPDM seals. For alkaline cleaners and bleach and chlorine.
Key specifications
- Capacity 1.25L in Klager's Foam Line sizing, filled to 1250 mL, carried here as the 1.2L Foamya
- Max pressure 58 PSI / 4 bar, capped by the pressure relief valve
- Seals EPDM
- Nozzle Foam nozzle, plastic, 110 degrees
- Weight 475 g empty
- Size 30.4 x 22.3 x 14.0 cm (height, length, width)
Not sure it suits your chemical? Check it in our Chemical Compatibility Guide.
Key benefits
- EPDM seals for alkaline degreasers, caustics and bleach
- Hand pumped, no air line and no power lead
- Holds 1,250 mL, with a see through level strip
- 4 bar, capped by the relief valve
- ErgoGrip handle and continuous spray button
- Every part available as a genuine Klager spare
What it is for
Alkaline degreasers, traffic film removers, truck and fleet foam wash, chlorine sanitisers, food plant cleaning, and washroom and shower cleaners. Clean is the general cleaning build: EPDM handles alkaline degreasers, caustics and chlorine bleach. Acetone, MEK and quat sanitisers are not rated for this build, so send us the SDS and we will check with Klager.
What EPDM does not handle is petroleum solvents. Those, and acids, need VITON (FKM), so for descalers, acid washes and concrete removers order the Foamya Acid version instead. Confirm concentration and temperature against the SDS before you settle on a seal, and match your chemical on the Chemical Compatibility Guide. Send us that SDS and we can put it to Klager's Chemical Application Center for a resistance recommendation. The testing is Klager's, run by their own applications engineers and chemists in Germany, and NORA PRO can submit to it as the exclusive Australia and New Zealand distributor.
How to use it
Fill to the max mark, 1,250 mL, and do not fill with liquid hotter than 30 degrees C. Screw the head down and pump around 30 strokes; the pressure relief valve caps it at 4 bar. The ErgoGrip handle and the continuous spray button make longer foaming runs comfortable, and the 110 degree foam nozzle lays a wide, even blanket of foam.
At service time, decant leftover chemical back into its original container, rinse the bottle, and grease the pump piston O-ring with silicone oil only. Petroleum based lubricants attack EPDM. Keep the unit out of heat, cold and direct sunlight.
Keep it running
Klager has built refillable, repairable pressure sprayers since 1949 and makes every component available as an original spare part. Klager's own position is that a broken pressure sprayer does not need throwing out, it can be repaired. NORA PRO stocks the genuine EPDM seal kits and pump parts, so a foamer that weeps or drops pressure gets rebuilt rather than binned. Keep a seal kit on the shelf so a worn seal never costs you the unit.
Klager also manufactures under the ISO 14001 environmental management standard and has run its German factory on 100 percent renewable electricity since January 2021. Those credentials belong to the German factory, not to NORA PRO.
For bigger jobs and other formats, see the full foamers and foam injection range, from larger pump up foamers to air driven wall and drum systems and termiticide foam injectors, which also explains which foam type suits the job. Request a Quote for the Foamya Clean 1.2L. Resellers and trade suppliers, apply for a trade account for wholesale supply and custom labelling.
Technical details
- Brand
- KLAGER
- Item number
- 03 041212
- Klager Line
- Foam Line (Foamya Clean)
- Seal Type
- EPDM
- Capacity
- 1.25L in Klager's Foam Line sizing, filled to 1250 mL, carried here as the 1.2L Foamya
- Made In
- Germany, by Klager
- Output
- Clinging foam, hand pumped, no air line and no power lead
- To Pressurise
- Around 30 pump strokes
- Max Pressure
- 58 PSI / 4 bar, capped by the pressure relief valve
- Filling
- Fill to the max mark, and do not fill with liquid hotter than 30°C
- Lubrication
- Silicone oil only on the pump piston O-ring
- Nozzle
- Foam nozzle, plastic, 110 degrees
- Spray Button
- With continuous spray function
- Size
- 30.4 x 22.3 x 14.0 cm (height, length, width)
- Weight
- 475 g empty
- Not Suitable For
- Petroleum solvents, which need a VITON (FKM) build
- Acid Version
- Foamya Acid, ordered separately
Common questions
Does it need an air line or power?
No. You pump it by hand, around 30 strokes, and the relief valve caps it at 4 bar.
Can I foam acid cleaners or descalers with it?
No. Acids and petroleum solvents need VITON (FKM). Order the Foamya Acid version for descalers, acid washes and concrete removers.
Is it the same as the Washfoam 1.2?
It replaces it. The Foamya Clean is Klager's current Foam Line model in this size.
