GLORIA - Germany
Termifoam | 5.0L Industrial Grade Poly Foamer | Termiticide Foam Injector
Item no. 02 003450.CMFI
Termifoam is a 5 litre pump up foam injector, built by NORA PRO on the Gloria CLEAN 500 with EPDM seals and a foam injector. It holds 5.0 L, works at up to 3 bar (44 PSI) and needs no air line or power.
EPDM seals.
Key specifications
- Liquid capacity 5.0 L
- Max pressure 3 bar / 44 PSI
- Seals EPDM
Key benefits
- Turns a termiticide mix into clinging foam
- Foam injector on a PU foaming tube
- Hand pumped, no air line or power lead
- VITON (FKM) seals
- Holds 5.0L
- Rebuilt with a genuine Gloria VITON seal kit
Application fields
The photo shows the NORA PRO modification on an earlier Gloria model. The sprayer we supply is built on the current Gloria CLEAN 500.
What it is for
Injecting foam termiticide into wall cavities, voids and galleries, where a liquid spray would run off.
Termiticides differ. Send us the product's SDS and we will confirm the EPDM seals suit it before you fill, and always follow the product label. It is not for oils or solvents. The termite barrier calculator helps you work out how much product a job needs.
How to use it
Mix the termiticide and foaming agent as the label says. Release any pressure, fill to no more than the 5.0 L mark, refit the pump and pump until you reach 3 bar. Put the injector into the drilled hole or gap and hold the trigger until the cavity is filled.
After the job, release the pressure, decant leftover product back into its container, rinse the tank with clean water and pump some through the injector. Store it depressurised.
Keep it running
Genuine Gloria spares for the CLEAN 500 range include the pump with EPDM seals (P2 729330.1111) and the coupling nut with bend protection (P2 729385.1111). Send us the model or a photo of the label and we will confirm the right part.
Pest controllers and resellers can request a quote or apply for a trade account. Built locally by NORA PRO on genuine Gloria. See the pest and termite control range, or the smaller Termifoam 3.0L.
Technical details
- Brand
- GLORIA
- Item number
- 02 003450.CMFI
- Built On
- Gloria CLEAN 500 (003450)
- Seal Type
- EPDM
- Liquid Capacity
- 5.0 L
- Max Pressure
- 3 bar / 44 PSI
- Safety Relief Valve
- YES
- Injector
- Foam injector
- Modified By
- NORA PRO, Brisbane
Common questions
Which termiticides can I use in it?
Send us the SDS and we will confirm. It has EPDM seals and is not for oils or solvents.
Does it need an air line or power?
No. You pump it by hand like a standard pressure sprayer.
