KLAGER - Germany
Termifoam 1.2L Pump Up Termiticide Foam Injector
Item no. 03 041212-TF
The Termifoam 1.2L is a Klager pump up foam injector with EPDM seals: it turns a termiticide mix into foam and delivers it through a stainless steel injector on a flexible tube. It is hand pumped, with no air line or power lead, and a level indicator on the bottle.
EPDM seals.
Key specifications
- Liquid capacity 1.0L
- Max pressure 44 PSI / 3 bar
- Seals EPDM
- Safety release valve Yes
- Liquid Level Indicator Yes
Key benefits
- EPDM seals, repairable with a genuine Klager seal set
- Stainless steel injector on a flexible tube
- Hand pumped, no air line or power lead
- Liquid level indicator on the bottle
- Relief valve limits it to 3 bar
Application fields
What it is for
Pest and termite control work where the treatment goes on as foam through the injector. Foam clings and stays in contact longer than a liquid spray.
Termiticides differ: water based and solvent carried products can need different seals, and this injector has EPDM seals, which are not for petroleum solvents or oils. Send us the termiticide's SDS and we will confirm before you fill, and always follow the product label. To work out the litres of mix and foam for a job from your label, use our Termite Barrier Calculator.
How to use it
Release any pressure, unscrew the head and fill to the max mark, leaving air space to hold the charge. Do not fill with liquid hotter than 30 degrees C. Refit the head by hand and pump around 30 strokes. The relief valve limits it to 3 bar.
After the job, release the pressure, decant leftover mix back into its container, rinse the bottle with clean water and pump some through the injector so the line comes clean. Grease the pump piston O-ring with silicone oil only, because petroleum based greases attack EPDM. Store it depressurised, out of heat and direct sun.
Keep it running
A worn seal is a repair, not a new unit: tell us the model and we will confirm the genuine Klager EPDM seal set it takes. Pest controllers and resellers can request a quote or apply for a trade account. NORA PRO is the exclusive Australia and New Zealand distributor of Klager. See all pest and termite control equipment and the full foamers and foam injection range.
Technical details
- Brand
- KLAGER
- Item number
- 03 041212-TF
- Seal Type
- EPDM
- Liquid Capacity
- 1.0L
- Max Pressure
- 44 PSI / 3 bar
- Safety Release Valve
- YES
- Liquid Level Indicator
- YES
- Injector
- Stainless Steel w/ flexible tube
Common questions
Which termiticides can I use in it?
Send us the product's SDS. Water based and solvent carried termiticides differ, and this injector has EPDM seals, so we confirm each product before you fill.
Does it need an air line or power?
No. You pump it by hand, around 30 strokes, and the relief valve limits it to 3 bar.
Which seal kit does it take?
A genuine Klager EPDM seal set. Tell us the model and we will confirm the right kit.
