Skip to product information
1 of 2

KLAGER - Germany

1.2L Acid Resistant Pressure Sprayer

Item no. 03 041375-AR

The Klager 1.2L Acid Resistant is a refillable pump up spray bottle for acid cleaners: 1,200 mL, VITON (FKM) seals, a polypropylene pump and a V4A stainless steel spring. Klager rates it for most acids and for alcohols such as isopropyl and ethanol, so one bottle covers descalers, wheel acids and alcohol based cleaners.

VITON (FKM) seals. For acids.

Key specifications

  • Liquid capacity 1200mL
  • Total capacity 1.2L
  • Max pressure 44 PSI / 3 bar
  • Seals VITON (FKM)
  • Bottle or tank HDPE
  • Pump Polypropylene
See all specifications

Not sure it suits your chemical? Check it in our Chemical Compatibility Guide.

Download data sheet (PDF)

Key benefits

  • VITON (FKM) seals rated by Klager for most acids
  • Also takes ethanol and isopropyl alcohol up to 100%
  • Holds 1,200 mL, with a see through level strip
  • Relief valve stops it being over pumped
  • Soft touch base ring keeps it standing
  • Every part available as a genuine Klager spare

What it is for

Acid wheel and alloy brighteners, descalers, toilet and bathroom cleaners, flash rust removers, and acid washes for brick, tile and concrete. It suits dilute acids: phosphoric and citric acid up to 30%, and hydrochloric and sulphuric acid up to 10%. Stronger hydrochloric (10 to 25%), sulphuric (10 to 30%) and nitric acid (up to 10%) are conditional, so ask us to confirm before you fill.

It also takes ethanol and isopropyl alcohol up to 100%. It is not the sprayer for acetic acid or methanol: use the Klager 1.2L Alkaline Resistant with EPDM seals. For hydrofluoric acid, ask us. Check section 3 of the SDS, or look your chemical up in the Chemical Compatibility Guide, before you fill.

How to use it

Release any pressure, unscrew the head and fill to the scale mark, no higher than 1,200 mL, so there is air space left to hold the charge. Do not fill with liquid hotter than 30 degrees C. Refit the head by hand and pump around 30 strokes. The relief valve stops it being over pumped, and a few strokes during the job keep the pattern even. The 0.8 mm hollow cone nozzle gives a fine, even spray; the see through strip on the bottle shows how much is left.

After the job, release the pressure, decant leftover acid back into its container, rinse the bottle with clean water and pump some through the nozzle so the pump and tip come clean. Store it depressurised, out of heat and direct sun. Wear the gloves and eye protection the SDS calls for.

Keep it running

Every part is available as a genuine Klager spare. When it weeps or stops holding pressure, fit a VITON seal kit rather than a new sprayer. Add a colour coding cap so acid bottles never get mixed up with alkaline or solvent ones, and a 15, 30 or 50 cm extension lance to reach into wheel barrels and behind fixtures. The soft touch base ring keeps it standing and protects the surface it sits on.

Detailers, cleaning contractors and resellers can request a quote or apply for a trade account. NORA PRO is the exclusive Australia and New Zealand distributor of Klager. See all acid resistant sprayers, and our guide to pressure spray bottles.

Technical details

Brand
KLAGER
Item number
03 041375-AR
Seal Type
VITON (FKM)
Pump Material
Polypropylene
Spring Material
V4A stainless steel
Bottle/Tank Material
HDPE
Total Capacity
1.2L
Liquid Capacity
1200mL
Max Pressure
44 PSI / 3 bar
Safety Release Valve
YES
Nozzle
Hollow cone, plastic, 0.8 mm
Size
31.3 x 19.6 x 11.9 cm (height, length, width)
Weight
410 g empty

Common questions

Which acids can I put in it?

Phosphoric and citric acid up to 30%, and hydrochloric and sulphuric acid up to 10%. Stronger hydrochloric, sulphuric and nitric acid are conditional, so ask us first. For acetic acid use the Klager Alkaline Resistant, and for hydrofluoric acid ask us.

Can I use it for caustic or alkaline cleaners?

No. VITON is the seal for acids and solvents, not for caustics or alkaline degreasers. Use the Klager 1.2L Alkaline Resistant with EPDM seals.

What if it stops holding pressure?

Usually a seal has worn. Fit a genuine Klager VITON seal kit rather than replacing the sprayer, and check the head is screwed down square.

Wholesale and trade supply

Resellers, distributors and chemical companies: open a trade account for volume pricing, custom labelling and reliable Australian supply.