GLORIA - Germany
PRO 8 | 8.0L Industrial Grade Poly Sprayer | Spiral Hose
Item no. 02 001206.SPRL
The PRO 8 Spiral Hose is the Gloria PRO 8 8 litre poly sprayer fitted by NORA PRO with a spiral hose that stretches to about 4 m. It has VITON (FKM) seals and a brass lance, holds 8.0 L and works at up to 3 bar (44 PSI).
VITON (FKM) seals.
Key specifications
- Liquid capacity 8.0 L
- Max pressure 3 bar / 44 PSI
- Seals VITON (FKM)
- Hose Spiral, stretches to about 4 m
- Lance Brass
Not sure it suits your chemical? Check it in our Chemical Compatibility Guide.
Key benefits
- Spiral hose stays off the ground and out of the way
- Holds 8.0L for fewer refills
- VITON (FKM) seals
- Brass lance with adjustable brass cone nozzle
- Pump and guide stocked as genuine Gloria spares
What it is for
Larger jobs that need more reach, such as formwork oil, general cleaning chemicals and most solvent based liquids over big areas, without moving the tank.
It suits most solvent based liquids, such as diesel, kerosene, turpentine, xylene, n-hexane, degreasers and tyre shine. It is not suitable for acids, alkaline products or acetone based products. Look your chemical up in the Chemical Compatibility Guide if you are unsure.
How to use it
Release any pressure, unscrew the pump and fill to no more than the 8.0 L mark. Refit the pump and pump until the piston gauge shows working pressure, never past 3 bar.
After the job, release the pressure, decant leftover chemical, rinse the tank with clean water and spray some through so the hose and lance come clean. Store it depressurised.
Keep it running
The pump with VITON seals (P2 728168.0000) and the VITON relief valve (P2 728651.0000) are stocked as genuine Gloria spares, and also fit the older PRO 5.
Contractors and resellers can request a quote or apply for a trade account. Set up locally by NORA PRO on genuine Gloria. See the standard PRO 8 or the smaller PRO 500 with spiral hose.
Technical details
- Brand
- GLORIA
- Item number
- 02 001206.SPRL
- Built On
- Gloria PRO 8 (001206)
- Seal Type
- VITON (FKM)
- Liquid Capacity
- 8.0 L
- Max Pressure
- 3 bar / 44 PSI
- Hose
- Spiral, stretches to about 4 m
- Lance
- Brass
- Not Suitable For
- Acids, alkalis, acetone
Common questions
Why a spiral hose?
It stretches to about 4 m and pulls back in, so you can reach further without carrying the tank.
PRO 8 Spiral or PRO 500 Spiral?
Same seals and pressure. The PRO 8 holds 8.0 L, the PRO 500 holds 5.0 L.
