GLORIA - Germany
PRO 8 | 8.0L Industrial Grade Poly Sprayer | Oil Resistant
Item no. 02 001206.0000
The Gloria PRO 8 is an 8 litre oil and solvent resistant pump up poly sprayer with VITON (FKM) seals, a brass lance and a brass flat jet 8002E nozzle. It holds 8.0 L of liquid, works at up to 3 bar (44 PSI) and has a piston pressure gauge with a built in safety valve.
VITON (FKM) seals.
Key specifications
- Liquid capacity 8.0 L
- Max pressure 3 bar / 44 PSI
- Seals VITON (FKM)
- Nozzle Brass flat jet 8002E
- Lance Brass
- Pressure Gauge Piston gauge with built in safety valve
Not sure it suits your chemical? Check it in our Chemical Compatibility Guide.
Key benefits
- Holds 8.0L for fewer refills
- Oil proof, with VITON (FKM) seals for oils and form oil
- Oil resistant hose
- Base ring keeps it standing
- Safety relief valve vents excess pressure
- Pump, guide, trigger, hose and lance stocked as spares
Application fields
What it is for
Formwork oil, concrete sealers, degreasers, brake cleaner and cleaning chemicals over bigger areas, with fewer refills than a 5 litre sprayer.
It suits most solvent based liquids, such as diesel, kerosene, turpentine, xylene, n-hexane, degreasers and tyre shine. It is not suitable for acids, alkaline products or acetone based products. For acids use the Gloria PRO 500 JET acid resistant, and for alkaline cleaners the Gloria CLEAN 500. Look your chemical up in the Chemical Compatibility Guide if you are unsure.
How to use it
Release any pressure, unscrew the pump and fill to no more than the 8.0 L mark. Refit the pump and pump until the piston gauge shows working pressure, never past 3 bar. Gloria rates the best spray pressure at 1.5 to 3 bar.
After the job, release the pressure, decant leftover chemical, rinse the tank with clean water and spray some through so the hose, lance and nozzle come clean. Store it depressurised.
Keep it running
The pump with VITON seals (P2 728168.0000) and the VITON relief valve (P2 728651.0000) are stocked as genuine Gloria spares, and also fit the older PRO 5.
Workshops, contractors and resellers can request a quote or apply for a trade account. Genuine Gloria, supplied by NORA PRO. See the PRO 8 with spiral hose, or the smaller Gloria PRO 500.
Technical details
- Brand
- GLORIA
- Item number
- 02 001206.0000
- Gloria Item
- 001206
- Seal Type
- VITON (FKM)
- Liquid Capacity
- 8.0 L
- Max Pressure
- 3 bar / 44 PSI
- Best Spray Pressure
- 1.5 to 3 bar
- Max Liquid Temperature
- 40 °C
- Not Suitable For
- Acids, alkalis, acetone
- Pressure Gauge
- Piston gauge with built in safety valve
- Lance
- Brass
- Nozzle
- Brass flat jet 8002E
- Empty Weight
- 2.1 kg
Common questions
Can I use it for solvents or brake cleaner?
Yes. Its VITON seals suit most solvent based liquids, including brake cleaner, kerosene, turpentine and xylene. It is not for acetone based products.
Can I use it for acid or caustic cleaners?
No. Use the Gloria PRO 500 JET acid resistant for acids and the Gloria CLEAN 500 for alkaline cleaners.
PRO 8 or PRO 500?
Same seals and pressure. The PRO 8 holds 8.0 L for fewer refills, the PRO 500 holds 5.0 L and is lighter.
