505TK | 5.0L Stainless Steel Sprayer | Concrete Sealer

Nitto type air intake fitted. NORA PRO supplies this sprayer with a Nitto type air intake, so it clicks straight onto a workshop air line with a Nitto type coupler and charges in seconds instead of hand pumping.

What it is for

Water and solvent based concrete, tile and stone sealers, applied in an even coat over driveways, pavers and tiles. The steady pressure from the gauge and air line connection keeps the coat even from start to finish.

It is not for acids, alkalis or acetone based products. Check section 3 of the sealer's SDS, or look it up in the Chemical Compatibility Guide, and ask us if you are unsure.

How to use it

Release any pressure, open the filler and fill to no more than the 5.0L mark. Close it, then pump by hand or connect an air line to the Nitto type air intake, and watch the gauge: never go past 6 bar. Keep the pressure steady and the lance at the same height for an even coat. A drip stopper on the nozzle stops sealer dribbling onto a finished surface.

After the job, release the pressure with the relief valve, decant leftover sealer back into its container and flush the tank, hose, lance and nozzle with the cleaner the sealer maker recommends before it cures. Store it depressurised.

Keep it running

The brass pump, piston plate kit, relief valve, base ring, filling funnel, Nitto type air connector and hose are stocked as genuine Gloria spares. Drip stopper sets for fan and cone patterns, extension lances and the adjustable cone nozzle are stocked too.

Concreters, tilers and resellers can request a quote or apply for a trade account. Genuine Gloria, supplied by NORA PRO. See all concrete, tile and stone sealing sprayers, or the larger Gloria 510TK Concrete Sealer.