GLORIA - Germany

505TK | 5.0L Stainless Steel Sprayer | Car & Truck Wash, Tyre Shine

Name: 505TK | 5.0L Stainless Steel Sprayer | Car & Truck Wash, Tyre Shine
Brand: GLORIA
SKU: 02 000506.TYSH

Item no. 02 000506.TYSH

The Gloria 505TK Car and Truck Wash is the 5 litre stainless steel pressure sprayer fitted with an RL16 spray gun, a 4001 stainless steel flat fan nozzle and a spiral hose that stretches to 4.0 m, for wash chemicals and water based tyre shine. It has VITON (FKM) seals, a pressure gauge and a Nitto type air intake, holds 5.0L in an 8.0L tank and works at up to 6 bar (85 PSI).

VITON (FKM) seals.

Liquid capacity 5.0L
Total capacity 8.0L
Max pressure 6 bar / 85 PSI
Seals VITON (FKM)
Bottle or tank Stainless Steel
Nozzle 4001 SS Flat Fan

See all specifications

Request a Quote Apply for a Trade Account

Download data sheet (PDF)

Key benefits

Set up for wash chemicals and tyre shine
RL16 spray gun with 4001 stainless flat fan
Spiral hose stretches to 4.0 m
Runs off the workshop air line
Pressure gauge shows the charge
VITON (FKM) seals

Application fields

Nitto type air intake fitted. NORA PRO supplies this sprayer with a Nitto type air intake, so it clicks straight onto a workshop air line with a Nitto type coupler and charges in seconds instead of hand pumping.

What it is for

Car, truck and fleet wash: applying pre wash and wash chemicals, and laying water based tyre shine on evenly. Connect it to the workshop air line to top up the pressure fast.

It suits water and solvent based tyre shine and wash chemicals, but not acids, alkalis or acetone based products. For acid wheel cleaners use the Gloria PRO 500 JET Acid Resistant, and for strong alkaline degreasers the Gloria CLEAN 500. Send us the SDS if you are unsure.

How to use it

Release any pressure, open the filler and fill to no more than the 5.0L mark. Close it, then pump by hand or connect an air line to the Nitto type air intake, and watch the gauge: never go past 6 bar. The safety relief valve vents automatically and can be opened by hand.

After the job, release the pressure, rinse the tank with clean water and spray some through the gun so the hose and nozzle come clean. The residual drain lets the last of the liquid out. Store it depressurised.

Keep it running

The RL16 spray gun, brass pump, piston plate kit, relief valve, base ring, filling funnel and Nitto type air connector are stocked as spares. Detailers, fleet washers and resellers can request a quote or apply for a trade account. Genuine Gloria, supplied by NORA PRO. See all car, truck and fleet wash equipment, or the larger Gloria 510TK Car and Truck Wash.